Non Clog Sewage Submersible Pump

Non Clog Sewage Submersible Pump
Non Clog Sewage Submersible Pump
Price And Quantity
  • 2
  • Piece/Pieces
  • 10000.00-
Product Specifications
  • Jet Pump
  • Matel
  • Electric
  • High Pressure
  • Water
  • Submersible, Sewage
    Product Description

    Non Clog Sewage Submersible Pump

    Jasco non-clog sewage submersible pumps are designed to handle raw sewage. It can handle solids up to 125mm. It can pump out fibrous material, plastics sheets & soft solids. It can also be provided with cutter / agitator arrangement. It can handle slurry, sludge, effluents etc. It can be installed either with Guide rail system or portable arrangement.

    Jasco non-clog Sewage pumps are driven by 'F' class squirrel cage induction motor as per IP-68, suitable for 3 Phase,415 V, 50Hz a.c. supply. Impeller of the pump is directly mounted on the extended shaft of motor, motor is protected with thermistor control, moisture sensor, reverse direction rotation protection, two mechanical seals running in oil of adequate combination.

    Stationary parts like motor body, oil chamber, volute etc. are of graded CI castings, shaft shall be S.S, heavy duty antifriction ball bearing shall be fitted. Impeller shall be graded C.I, / S.S. or as the clients requirement, multicore P.v.c. round cable, with double P.v.c. seathing, shall be connected as standard accessory. All assembly parts are made water tight by using suitable 'O rings/gaskets. Rotor & Impeller are dynamically balanced for vibration free rotation. All major CI parts are hydraulically tested at suitable pressure to avoid leakage while running.

    Applications

    • Sea water
    • Pots & docks.
    • Paper pulps, paper mills.
    • Drainage & sewage system.
    • Transfer of suspended solids.
    • Unscreend stores tanks, airport.
    • Raw water pumping applications
    • Large stores tanks with stable silt
    • Disilting in laguns, sugar cane mills, distilaries.
    • Sludge, waste water, storm water effluent with slurry & solids.
    • Stp & etp plants.
    • Water in tank like restaurant, railway, factory, housing complex, Tannery and power plants.

    Technical Specifications


    Pump

    Discharge Sizes

    50 To 500 Mm

    Flow Rate Capacity

    Up To 3500 M3/Hr.

    Head Capacity

    Up To 85mtr.


    Motor

    Rating

    Up To 373 Kw/ 500 H.P.

    Speeds

    750/1000/1500/3000 (SYNCHRONOUS Speed)

    Duty/Enclosures

    S1/  Better Than Ip68

    Supply Condition

    3ø, 415v,690v, 50 Hz. A.C. Supply

    3ø, 415v,550v, 60 Hz. A.C. Supply



    Description

    Material

    Qty

    Rubber Gromate

    Nitrial Rubber

    2

    Cable

    Cu + PVC

    10 Mtr

    Cable Gland

    C.I FG 260

    1

    Eye Bolt

    S.S

    2

    Winding coil

    Cu.

    1 Set

    Bearing Cover

    C.I. FG 260

    1

    Mechanical Seal

    TC/TC. SIC /SIC

    1+1

    Oil Chamber

    C. I FG 260

    1

    Impeller

    C. I FG 260 1

    1

    Stand

    M.S Fabricated

    Fabricated

    Spiral Plate

    C.I FG 260

    1

    Impeller lock Nut

    S.S 316

    1

    Pump Casing

    C.I FG 260

    1

    Oil

    20W40

    3 Lit

    Bearing Housing

    C.I FG260

    1

    Ball Bearing D/E

    C.S

    1

    Rorot Shaft

    S.S 410

    1

    Stator stamping

    CRNO

    1

    Motor Body

    C.I FG 220

    1

    Rotor Diecast

    CRNO + Allu

    1

    Ball Bearing N/D

    C.I FG260

    1

    Top Cover

    C.I FG

    1

     

     


    Trade Information
    • Cheque, Cash in Advance (CID), Cash Advance (CA)
    • 500 Per Month
    • 1 Week
    • All India
      Contact Us

      47, Phase-I, G.I.D.C., Opp. Mangal Estate, Naroda Ahmedabad Gujarat India 91-79-22821240/22823422/22201484/22200156
      Phone :91-79-22821240/22823422/22201484/22200156